ΠΕΡΙΓΡΑΦΉ
ComFi WL9600 is an outdoor 2x2 dual-band WiFi6 wireless AP, suitable for outdoor areas that require wireless coverage such as scenic spots, parks, schools, and squares. ComFi WK9600 supports 2x2 11ax, and the maximum concurrent connection rate of dual-band can reach up to 1800Mbps, which can build a stable and high-speed wireless network for users. ComFi WK9600 has high-performance wireless indicators, can get a larger wireless coverage area and better wall penetration performance. ComFi WK9600 supports the access of up to hundreds of wireless terminals to meet the application scenarios of high-density wireless terminals. At the same time, ComFi WK9600 also has good compatibility and supports the access of most wireless terminals on the market. Users can use mobile phones, tablets or laptops to easily connect.
High power WIFI design
Built in high power amplifier and low noise amplifier, working together to enhance signal stability and expand wifi range.
Dual Band 1800Mbps
The AP supports both 2.4GHz and 5GHz dual-band access. By controlling the terminal to preferentially access the 5GHz frequency band, dual-frequency end users in the 2.4GHz frequency band are migrated to the 5GH frequency band, reducing the load and interference on the 2.4GHz frequency band, and improving user experience.
Support 100+ users
Support 100+ terminal equipment access, applicable to user intensive places.
Χαρακτηριστικά προϊόντος
Wi-Fi6 (IEEE 802.11ax) Standard
- 802.11ax, as the latest generation of IEEE 802.11 Wi-Fi standard, can increase user access capacity and bandwidth in high-density access scenarios, reduce service delays, and enhance user experience.
- Support 2.4GHz and 5GHz dual-frequency UL/DL MU-MIMO, enabling AP to send data to multiple terminals at the same time, and the utilization rate of wireless spectrum resources is higher than predecessor 802.11ac.
- Support 1024QAM modulation, data transmission efficiency is increased by 25% compared with 802.11ac (256QAM).
- Support UL/DL OFDMA technology, use different subcarriers to transmit data to multiple terminals at the same time, reduce delay and improve network efficiency.
- Support spatial multiplexing technology, through the BSS colouring mechanism (BSS colouring) so that AP and terminal can distinguish overlapping BSS (basic service set), to minimize co-channel interference.
- Support target wake time* mechanism, allowing AP and terminal to negotiate sleep and wake time, reducing conflicts between terminals and unnecessary wake-up times, saving terminal power, and improving battery life.
Multi-User Uplink and Downlink-multiple Input and Multiple Output Technology (MU-MIMO)
Support MU-MIMO technology, support up to 4 spatial streams, 2.4GHz frequency band supports 2 spatial streams, 5GHz frequency band supports 2 spatial streams, through DL/UL MU-MIMO technology, AP can send data to multiple terminals at the same time, The utilization rate of wireless spectrum resources has been doubled, increasing the number of access users and bandwidth, and improving user experience in high-density access scenarios.
High-Speed Access
Supports 80MHz bandwidth. The increase in bandwidth has increased the available data sub-carriers and expanded the transmission channel; in addition, the use of 1024QAM modulation, MU-MIMO and other technologies makes the 5GHz single frequency band rate up to 1.2Gbps, and the whole machine rate is up to 1.8Gbps.
5GHz Priority
The AP supports both 2.4GHz and 5GHz dual-band access. By controlling the terminal to preferentially access the 5GHz frequency band, dual-frequency end users in the 2.4GHz frequency band are migrated to the 5GH frequency band, reducing the load and interference on the 2.4GHz frequency band, and improving user experience.
High-level Protection
- It adopts metal shell and overall heat dissipation design, suitable for wide temperature operation of -40°C to +65°C and adopts IP68 waterproof and dustproof design.
- 6KA/6KV enhanced lightning protection, fully meet the requirements of industrial-grade use;
- Reinforced with metal fasteners and cable connectors to ensure connection fastening performance and equipment working stability;
- The antenna port has a built-in 5KA high-spec lightning protection device, no external lightning protection device is required, which simplifies installation and reduces costs.
External Indicator
The external high-bright status indicator light makes the equipment running status clear at a glance, saving troubleshooting time.
ΠΡΟΔΙΑΓΡΑΦΈΣ
Model
|
WK9600
|
Dimension
|
265mm x 195mm x 85mm (L x W x H) (Including N-Type Connector)
|
Weight
|
1823g
|
Installation
|
Wall or Pole Installation
|
LED Indicators
|
PWR / SYS / 2.4GHz / 5GHz / SFP
|
Interfaces
|
1 x GbE Uplink, Support 802.3at Power Supply 4 x N-Type Antenna Connector (WIFI)
|
Power Input
|
48V ~ 57V, 802.3at PSE
|
Environment
|
Operating Temperature
|
-40°C to +65°C
|
Storage Temperature
|
-40°C to +70°C
|
Operating Humidity
|
5% - 95% (non-condensing)
|
Air Pressure
|
86kPa ~ 106kPa Altitude
|
IP Rating
|
IP67
|
Safety Certification
|
SRRC, Can do according customer’s request
|
Stability
|
Annual Failure Rate
|
AFR < 1.5% (Continuous Operation Status)
|
Chipset Solution
|
CPU
|
Qualcomm IPQ6000 + QCA8075 + QCN5022 + QCN5052
|
Flash
|
16MB SPI NOR Flash + 128MB NAND Flash (Optional 32MB SPI NOR Flash)
|
RAM
|
512MB DDR3L Memory
|
![](/files/media/products/TECHNOLOGY/Internet/AP/description/1.jpg)
![](/files/media/products/TECHNOLOGY/Internet/AP/description/2.jpg)
![](/files/media/products/TECHNOLOGY/Internet/AP/description/3.jpg)
![](/files/media/products/TECHNOLOGY/Internet/AP/description/4.jpg)
![](/files/media/products/TECHNOLOGY/Internet/AP/description/5.jpg)
![](/files/media/products/TECHNOLOGY/Internet/AP/description/6.jpg)
![](/files/media/products/TECHNOLOGY/Internet/AP/description/7.jpg)
![](/files/media/products/TECHNOLOGY/Internet/AP/description/8.jpg)
![](/files/media/products/TECHNOLOGY/Internet/AP/description/9.jpg)